Panel Upgrades in Sacramento
Sacramento’s housing stock tells its own story. Whole neighborhoods — East Sacramento, Land Park, Arden-Arcade, North Highlands — were built in the decades when a 100-amp panel (or smaller) was all a home would ever need. That was before EV chargers, hot tubs, home offices, induction kitchens, and additions became normal. Elevate Utilities upgrades and replaces panels across Sacramento safely and to code, so your home has the capacity it needs now and room to grow.
Older Sacramento homes are the heart of this work
A large share of our panel work is in homes built before 1990 — houses whose electrical systems were sized for a fraction of today’s loads. Sometimes the right answer is a full 200-amp upgrade. Sometimes a repair or a like-for-like changeout is the honest call. We check first, explain what we find in plain language, and put the options in writing before you decide anything.
Panel questions Sacramento homeowners ask us
Do I need a permit to replace my panel in Sacramento?
Yes — a panel replacement requires an electrical permit and a city or county inspection, and the work must be done by a licensed contractor. We pull the permit, schedule the inspection, and coordinate the disconnect and reconnect start to finish.
How long will my power be off?
Plan on the power being off for a good part of one day while the old panel comes out and the new one goes in. In most cases, power is back on the same day.
My breakers trip — does that automatically mean a new panel?
No. A tripping breaker can be one overloaded circuit, a failing appliance, or a bad breaker. We find the actual cause first; if a repair fixes it, that’s what we’ll recommend.
Get a free estimate
Call or text (530) 515-6924 — or send us a photo of your panel and its label, and for a lot of questions we can tell you what you’re likely looking at before anyone comes out. Free estimates. Open 24/7 for emergencies.
Elevate Utilities · CSLB #1084701 · Panel upgrades, EV chargers, service work — done right, permitted, and inspected.
Signs your Sacramento home may need a panel upgrade
Breakers that trip when the AC, dryer, and kitchen run at the same time
Lights that flicker or dim when a big appliance starts
A panel that feels warm, buzzes, or smells off
Rust or corrosion inside the panel
No open breaker spaces when you want to add a circuit
A panel that’s 25+ years old — or an older Federal Pacific (FPE) or Zinsco panel, both common in Sacramento homes of that era
Those last two brands deserve a straight word: FPE Stab-Lok and Zinsco panels have a documented history of breakers failing to trip when they should. They were never recalled, and we won’t tell you otherwise — what we’ll do is inspect yours and put what we actually find in writing.
What a panel upgrade with Elevate includes
A free estimate and an honest load calculation before any work is quoted
The permit, pulled and handled by us, and the inspection scheduled in advance
Coordination of the disconnect and reconnect so the day runs on a plan, not a guess
The new panel, meter main, or service entrance work if your service needs it — we handle the whole path from the street to your breakers, not just the box on the wall
Most residential upgrades completed in a single day, with power restored the same day in most cases